Products  
MIL-STD-1275 Power Line Protection

MIL-STD-1275 Power Line Protection

Email for more info
MIL-STD-1275 Power Line Protection are unique, small dimension units that provide adequate protection against all over voltage transients (Surges and Spikes) phenomena of power lines, in ground mobile vehicles. It is designed for both floating and grounded to chassis input voltage. The small dimension enables PCB mounting for ease of usage. The product is also available in wire-lead termination for other installation options. The product contains reversed polarity protection and clamping

MIL-STD-1275 Power Line Protection

 General Description

 

 

MIL-STD-1275  Power  Line  Protection  are  unique,  small dimension  units  that  provide  adequate  protection  against  all over  voltage  transients  (Surges  and  Spikes)  phenomena  of power lines, in ground mobile vehicles. It  is  designed  for  both  floating  and  grounded  to  chassis  input voltage. The small dimension enables PCB mounting for ease of usage. The product  is also available  in wire-lead  termination  for other installation options. The product contains reversed polarity protection and clamping
of high voltage input. The protection  is against high  (up  to 100V@50ms) surges and spikes (± 250V@15mJ). This  power  line  protection  is  the  solution  for  equipment  that
does not powered by PDSU product		  

 

 

 

Typical Specifications

  • Input Working Voltage:
 12V to 33V
  • Input Transient Voltage: 
 +100V@50msec@0.5Ω source impedance ±250Vpk@50usec@15mj
  • Output Working Voltage:
  VO=VIN - Dropout (11Vmin to 33Vmax)
  •  Output Transient Working Voltage:
  33V to 37V@50msec
  •  Working Current:
   20A max.
  •  Input to Output Voltage Dropout:
   1V@20A, 100mV@0.5A, 0.6V@12A, 
  •  Power Dissipation:
   20W max@20A, 10W@10A
  •  Transient Power Dissipation:
   2000W@50msec
  •  Shut Down:
    “0” Enabled
  •   Insulation (Only for floated configuration):
  
    •  Input to Chassis:
  1500Vdc@1sec
    •  Output to Chassis:
  1500Vdc@1sec
  •  Quiescent Current:
   20mA@ VIN=24V
  •  Reverse Voltage Protection:
    0 to (-36V)
  •  Response Time:
   ton=20msec@Vin=0V to VIN=24V
  •   Dimensions:
  half brick case (57.9mmX61.0mmX21.4mm)
  •  Weight:
   125gr

 

 

 

Environmental Conditions: 
 

Operating Temperatures: - 40°C to 71°C
Storage temperatures: - 40°C to 71°C
Vibration:  Method 514.5, Proc I, Cat 20 Ground Vehicle.
Shock: 40g X 15ms Saw Tooth

 

 

Previous Back Main
Minimize
  Product Brochures  
 TitleDescriptionSize 
Man Portable Energy Pack (MPEP) SeriesIndependent Energy Supply in the field for soldier and unit.202.85 KBDownload
MIL - STD - 1275 Power Line Protectors (PLP) SeriesPower supply protection for any equipment directly connected to vehicle power system187.22 KBDownload
MIL-STD-1275 Power Line Protectors (PLP) seiresPower supply protection for any equipment directly connected to vehicle power system 179.73 KBDownload
Power & Communication Distribution Unit - Ground Mobile (PCDU - GM) SeriesFast battery charger (enable working while charging)187.22 KBDownload
Power Distribution and Stabilized Unit (PDSU) SeriesEnable each connected powered device according to its needs187.22 KBDownload
Power Distribution and Stabilized Unit (PDSU) series Multiple connections for vehicle, keep full power for consumers under severe vehicular power fluctuations245.48 KBDownload
Telecom and Data Line Filter (TDLF) SeriesUnit that ruggedize for military applications an industrial communication equipment not approved for military187.22 KBDownload
Telecom and Data Line Filter (TDLF) seriesUnit that ruggedize for military applications an industrial communication equipment not approved for military 255.10 KBDownload
The ABCD series Multipurpose Power & Communication Distribution Unit for Ground vehicles232.05 KBDownload
The EVR Protection series EVR-3 Electricity Voltage and RCD Protection Unit for 230V AC/50Hz 3 Phases 87.55 KBDownload
The LVPSP series Land Vehicle Power System Protection Per MIL-STD-1275 162.70 KBDownload
The MAPSC series Military Aviation Power System Conditioner Per MIL-STD-704 193.22 KBDownload
Home | Solutions | Products | Contact Us
Copyright 2007 by EMCignal    Terms Of Use  |  Privacy Statement
AtarimTR LTD